The Goodsmaster Goods Lift «

The Goodsmaster Goods Lift 24. 02. 2010

The Goodsmaster goods lift is available in a choice of four different models. The lightest lifting model starts at 500 kilograms and progresses through the 750 kilogram and 1,00 kilogram models up to the heaviest lifting one available, the 1,500 kilogram model. They are all suitable for warehouse or factory handling solutions where items on a pallet, furniture, bulky and heavy electrical goods, or stock of any kind can be vertically raised or lowered safely between floors.

This is a goods lift that can be installed easily and quickly. Installation work by builders’ is minimal and the structure can be erected almost anywhere. The structure more or less supports itself and does not require excessive top motor room for winding machinery. It does not need a deep pit at base level either. Ideally it should be installed in a pit of 150 millimetres depth, but can sit at floor level and operate by means of a ramp that raises access machinery such as forklifts by 150 millimetres.

There is no dedicated lift shaft required. This is a significant consideration. It represents savings in time and expense. The lift does not require a load bearing wall either, which means even more savings to the company. Delivery can take place in a matter of a week or so, and a brand new lift can be installed in a matter of days. It can have two-way entry on each floor and it is completely safe, conforming to all the necessary and expected regulations.

Each floor will need to have an opening of the right size that the Goodsmaster goods lift can stop at to provide entry and exit access. The electrical power supply will need to be 415 volts, and all the work performed by the builder must comply with and conform to the Supply of Machinery (Safety) Regulations 1992. The goods lift company will arrive onsite after the installation work is completed in order to test the lift and, if successful, CE mark it.

The lift range is limited really only by the number of floors in the place where in is used. Usually this is not over four or five floors, but it can be flexible within reason. This is an extremely efficient lift with few essential requirements. The specification is robust and hard wearing. It will serve a long time, lifting loads safely and efficiently, giving many good reliable working years of quality life.

Speak to Public Access about any of our services including Platform Lifts, Passenger Lifts, Stair Lifts, Goods lifts or Door Automation.

More in this section: